If you have a lot of expensive electronic devices in your home, installing home electrical surge protection is a great investment. It will help prevent power surges and save you money in the long run.
Surges can come from a number of sources, including lightning strikes and downed power lines. They can cause serious damage to your appliances and electronics, as well as your home’s wiring.
Save Money on Electrical Repairs
The Benefits of Installing Home Electrical Surge Protection
A surge protector helps to minimize the risk of expensive electrical repairs by preventing damage to your appliances and electronics. This can save you money and prevent fires in your home.
The most common reason for electrical problems in homes is power surges, which are caused by lightning strikes and other outside events. These surges can cause a variety of problems, from frying circuit boards on your appliance’s sensitive electronics to damaging electrical wiring.
Another common cause of surges is faulty appliances and tripped circuit breakers. Similarly, poorly-designed wiring can also lead to problems.
Surges can be small and go unnoticed, but they are extremely dangerous. They can damage the delicate circuit boards in your appliances, shortening their lifespans and requiring costly repairs.
In addition, a surge can damage your home’s wiring, causing sparks, arcing, and fires. This can result in expensive repairs that may not be covered by your insurance company.
One of the best ways to protect your home from power surges is by installing a whole-house surge protector. These devices are available from many home improvement stores and can be installed by a professional electrician.
A whole-house surge protector can help to decrease the amount of time you spend on electrical repairs and maintenance, and it can also reduce your electric bill. This can be especially beneficial in older homes that have antiquated wiring.
You can purchase a quality whole-house surge protector for as little as $300, though it will depend on the type you choose and whether the protector requires an outlet modification. If you need a new outlet installation, the cost will vary depending on the type of switch or outlet you need and whether it needs to be a ground fault circuit interrupter (GFCI).
A whole-house surge protector can significantly increase the lifespan of your home’s appliances and electronics by minimizing the risks of power surges. This can prevent thousands of dollars in repairs and reduce the chance of fires in your home.
Increase the Lifespan of Your Appliances
A power surge is a sudden change in voltage that can cause damage to appliances and electronics. These surges can occur from lightning strikes, downed power lines, and other sources.
In addition to the large-scale surges that are caused by lightning, there are also smaller power surges that can occur dozens of times throughout the day. They don’t seem as dramatic, but they can still have a damaging effect on your home’s electrical devices and appliances.
Most power surges happen when a home appliance starts up or shuts off, sending a burst of electricity into the electrical system. This causes a reversal of the flow of electricity, diverting it to other devices and causing fried circuits or melted plastic.
The good news is that most power surges are transient, meaning they don’t cause permanent damage, but they can degrade the performance of your electronics and appliances over time. A whole-home surge protector can help prevent this degradation and increase the lifespan of your appliances.
Surges can be triggered by faulty in-home wiring, electrical devices that aren’t grounded properly, and tripped breakers. They can also be caused by nearby power plants and factories, which can send a sudden surge of electricity into your home.
These internal surges are more common than you might think, and they can result in severe damage to your appliances. They can also cause a shortening of your device’s lifespan and increased replacement or repair costs.
A whole-home surge protector works by limiting the amount of excess voltage that can reach your home’s circuits, so it doesn’t affect the electronics you rely on for your daily routine. This protection can even reduce your risk of house fires and explosions because it prevents high voltages from reaching flammable areas in your home.
Installing a whole-home surge protector is an easy and affordable way to protect your home’s electrical system from voltage spikes that could harm appliances, electronics, and other electrical devices. You can also get a discount on insurance premiums by installing one of these devices.
Ultimately, installing a whole-home surge protector is an investment that will pay off in the long run. It will save you money on repairs, help avoid fires and damage to your electronic devices, and make your life more convenient by preventing unexpected surges from disrupting your home’s electrical systems.
Avoid Damage to Your Electronics
Power surges can cause significant damage to your electronics and appliances, and it is important to protect them. Surges are sudden peaks in electrical voltage that occur when a home’s system is overloaded or malfunctioning, or because of external events like lightning strikes or rain storms.
The incoming electricity to your house flows through a complex network of generators, lines, transformers, monitoring points and circuits. Each of these is susceptible to power surges, which can jump hundreds or thousands of volts in a fraction of a second, causing a lot of damage.
Surges can be caused by faulty appliances, tripped circuit breakers, bad wiring, and other issues in the home’s electrical system. These seemingly minor problems that are easily overlooked can damage your electronic equipment over time and lead to frequent repair bills, which can be a significant financial burden.
However, you can avoid damage to your electronics and appliances by installing home electrical surge protection. A professional electrician can install a whole house surge protector to safeguard all the devices in your home, even those that are not connected to the main panel.
Using a whole-house surge protector can prevent costly repairs from occurring due to power surges. It will also reduce the chance of your household equipment catching fire.
Most households today have more electronic gadgets than ever before, and these devices often contain sensitive circuit boards. Having an appliance or device hit by a surge can damage these delicate circuit boards, which could leave you with broken appliances and wiped data on your personal devices.
In addition, most electronics and home appliances are now made with LED light bulbs that have micro circuit boards that can easily be damaged by an electrical surge. This means that your appliances and your electronic devices need to be protected from surges, which is why most homeowners choose to have a whole house surge protector installed.
A whole house surge protector will divert external power surges from the incoming wiring to the grounding wire. This will ensure that any surges caused by other outside sources are not sent into your household’s electrical system, and that any resulting fire or damage is avoided.
Reduce Your Risk of Fire
Surges of electricity from lightning strikes aren’t just a nightmare when they happen, but they can also cause damage to appliances. Fortunately, you can reduce the risk of fire in your home by installing whole home surge protection.
Power surges occur more frequently than you may think, and it’s hard to predict when they’ll hit your home. These occurrences can result in expensive electrical repairs, and they are often not covered under your homeowners insurance policy.
These small electrical surges can damage the electronics and appliances in your home, making them unusable. This can be especially devastating if you have older appliances that aren’t protected by home surge protection, as they could go out at any time.
In addition to protecting the appliances and electronics in your home, surge protectors can help prevent electrical short circuits, which can cause sparks that could ignite a fire. These short circuits are commonly caused by faulty outlets and damaged wiring.
You can also protect your home against wildfires by reducing the amount of fuel near it. This can be done by clearing bushes and trees, removing dead vegetation and using fire-resistant materials around your home.
The majority of wildfires in the United States are human-caused, and many of these fires are started by youths stealing or burning materials around the home. This can include discarded wood, campfire debris and even hot ashes or BBQ coals.
Another way to reduce the risk of wildfire is by ensuring that your house is located away from other homes, as these can create re-entrant corners, where fire whirls can spread from one house to the next. It’s also important to clean up your yard, roof and gutters of leaves and pine needles that could burn.
Installing whole home surge protection is an affordable investment that can make your home safer from both lightning and power surges. Not only can it reduce the risks to your electrical appliances and electronics, but it can also save you money on your homeowners insurance policy. It’s a simple investment that can pay for itself over time and is well worth it to ensure your family’s safety and the longevity of your appliances and electronics.